logo
Brake fluid

Brake fluid

Filters

Chassis number (VIN)

Product type

Product brand

Volume

Products 1-2 of 2

  1. Brake fluid Eurol Brake DOT 4 (1L)
    Original
    manufacturer

    Brake fluid Eurol Brake DOT 4 (1L)

    SKU: E801400-1L

    29 in stock
  2. Brake fluid Eurol Brake DOT 4 (0.25L)
    Original
    manufacturer

    Brake fluid Eurol Brake DOT 4 (0.25L)

    SKU: E801400

    18 in stock

Moped car brake fluid

Brake fluid is the hydraulic fluid in the brake system of your moped car and converts the force you apply to the brake pedal into pressure on the brake calipers and brake cylinders. Without good brake fluid, the braking distance becomes longer, the brake pedal feels spongy and in the worst case the brakes can fail completely. Brake fluid is therefore directly decisive for the safety of your vehicle. Brake fluid also slowly absorbs moisture from the surrounding air, which lowers the boiling point and promotes corrosion in the brake system. For this reason, periodic replacement is necessary, even if the fluid still looks fine visually. Minicar-Parts supplies brake fluid suitable for moped cars of the brands Aixam, Microcar, Ligier, Chatenet, JDM, Bellier, Grecav and Casalini.

A replacement of the brake fluid is needed when you notice signals such as a brake pedal that pushes deeper than normal or feels spongy, a longer braking distance, a dark or brown discoloured fluid in the reservoir, a dropping level in the brake fluid reservoir, a lit brake or ABS warning light on the dashboard, or visible leakage under the moped car at the wheels or the master cylinder. In addition, always follow the replacement interval prescribed by the vehicle manufacturer, usually every two years, as brake fluid unnoticeably absorbs moisture.

Practical tips for a brake fluid change

Use only brake fluid of the type specified by the manufacturer (usually DOT4) and never mix different types together, as this can lead to damage to rubber seals and gaskets. Always use fresh brake fluid from a sealed container, as the fluid starts absorbing moisture immediately after opening. Bleed the brake system fully after a change to remove air bubbles from the circuit, as air bubbles make the brake pedal spongy. Work carefully and rinse off immediately with plenty of water in case of spillage, as brake fluid attacks paint and plastic. During a change, also check the condition of related parts such as the master cylinder and the brake fluid reservoir, as leakage or wear here can cause the same symptoms as old fluid. Always have the old brake fluid disposed of via a certified collection point, as the fluid is environmentally harmful.

For a complete overview of all filters and fluids, please refer to the parent category filters.

Expert advice and fast delivery

The specialists at Minicar-Parts are happy to help you find the right brake fluid for your moped car. Thanks to a large stock, the brake fluid is available for immediate delivery, so you can get back on the road safely and quickly. Whether you are a private owner or run a professional workshop, our team is ready to help with any question.

With the right brake fluid, the brake system of your moped car continues to respond reliably and you keep a short, predictable braking distance, for every model and every brand.